Go for your new calibration standard!
Innovative 1 and 2 color Endurance Series designed for your use as dedicated calibration instruments (DCI)
- High accuracy
- Ratio Pyrometer – 3 point calibration max. deviation +/- 0.3%
- Single short wave – 3 point calibration max. deviation +/-0.2%
- Factory approved calibration geometry supplied for Fluke Process Instruments devices
- Industry 4.0 compliant "COMS and Power"
- LED sighting "indicates spot size"
- Easy to read rear LED and LCD display with 0.1K resolution
- More options includes on-board visible camera, laser sighting and other
Non-Contact Infrared Pyrometer - Endurance Series
Innovative 1 and 2 color infrared pyrometers designed for your harshest environments
- Fiber optic and integrated sensing head models with multiple wavelengths, lenses, and sighting options to cover your whole process with fewer units
- Sighting options includes on-board visible camera, laser sighting, and LED sighting - Wide temperature ranges for 1 color or 2 color measurement down to 50˚C and up to 3200˚C
- All Endurance sensors are powered either through PoE or using DC power and integrate to various BUS systems including Ethernet, Profinet, and RS-485
Your process is unique, but there’s an Endurance solution designed for you.
High-Temperature Applications
Molten metals
Heat treating
Hot strip mills
Forging
Continuous casting
Blast furnace
Glass
Cement kiln burning zone
Sintering
Crystal Growing
Annealing
Vacuum furnaces and weldingOther high-temperature applications up to 3200°C/ 5792°F
Pyrometer Applications
Low-Temperature Applications
Annealing
Cold rolling mills
Induction heating
Kilns
Weld pre-heating
Finishing mills
Vacuum furnaces
Slab reheating
Billet reheating
Thin wires or rods
GalvanizingOther low to medium temperature applications ranging from 50°C/122°F to 1200°C/2192°F
Your process is unique, but there’s an Endurance solution designed for you.
Easy Installation
Cost Reduction
Continuous Monitoring
Select a variety of interfaces specific to your process. Analog input to control E-Slope, emissivity or ambient background compensation within seconds
Durable sensors and industrially designed accessories increase lifespan of pyrometers combined with a best-in-class 4 year warranty
Improve product quality and ensure uniformity with 24/7 continuous monitoring to reduce reject rates and maximize throughput. Includes field calibration software and dirty lens alarm
Together with supplied Datatemp Multidrop Software you can calibrate and adjust your sensors in house.
Calibration on-site
What is a 2-color pyrometer and why do I need it?
How do you measure temperature accurately?
How to calculate your spot size diameter?
More Information on Pyrometers
Who we are
Fluke Process Instruments is a division of Fluke Corporation with over 150 years of combined industrial experience, we’ve pioneered a solution specifically for your process needs. Three industry leaders Raytek, Ircon, and Datapaq, joined together to create Fluke Process Instruments, offering a broad portfolio of industrial temperature measurement solutions. Providing non-contact infrared temperature measurement and thermal profiling solutions is our business.
Who we are
Fluke Process Instruments is a division of Fluke Corporation with over 150 years of combined industrial experience, we’ve pioneered a solution specifically for your process needs. Three industry leaders Raytek, Ircon, and Datapaq, joined together to create Fluke Process Instruments, offering a broad portfolio of industrial temperature measurement solutions. Providing non-contact infrared temperature measurement and thermal profiling solutions is our business.
Verify your process temperatures with Endurance® Infrared Pyrometers
Easy Installation
Cost Reduction
Software Analysis
Application Support
Endurance infrared sensor in environments up to 315°C (600°F) and measure target temperatures up to 1200ºC (2192ºF)
Using existing cables and accessories to obtain the sensor emissivity right within seconds
Continuously monitor your application and review temperature data with user-friendly software. Includes Field Calibration software
Receive worldwide application support and service from our regional offices and global network of distributors
Endurance Pyrometer Key Features:
Innovative 2 color low temperature infrared pyrometer for medium temperature processes
Endurance fiber-optic pyrometers allow measurement of targets that would otherwise be inaccessible because of space constraints or harsh environments
Industry 4.0 communication Protocols available such as Ethernet, Profinet
Finishing Mill, Annealing, Weld Pre-heating: Induction Heating, Wedge, Cold Rolling Mill, induction heating, vacuum furnaces, kilns, molten metals, thin wires or rods.
Endurance Pyrometer
Verify your process temperatures with Endurance® Infrared Pyrometers
Easy Installation
Endurance infrared sensor in environments up to 315°C (600°F) and measure target temperatures up to 1200ºC (2192ºF)
Improve product quality and ensure uniformity with 24/7 continuous monitoring to reduce reject rates and maximize throughput. Includes field calibration software and dirty lens alarm
Easy Installation
Select a variety of interfaces specific to your process. Analog input to control E-Slope, emissivity or ambient background compensation within seconds
Cost Reduction
Durable sensors and industrially designed accessories increase lifespan of pyrometers combined with a best-in-class 4 year warranty
Continuous Monitoring
Application Support
Receive worldwide application support and service from our regional offices and global network of distributors
High-temperature pyrometers are available in single color, two color, and fiber optic models
Continuously monitor your heat treatment process allowing you to archive and review temperature data with the Endurance® companion software
Designed for the harshest environments Endurance infrared sensors measure target temperatures up to 3200°C (5792°F) and installation temperatures up to 65°C (149°F)
Reduce installation costs on heat treatment lines by using existing cables and accessories and getting the sensor emissivity right within seconds
Pyrometer Applications
Low-Temperature Applications
Annealing
Cold rolling mills
Induction heating
Kilns
Weld pre-heating
Finishing mills
Vacuum furnaces
Slab reheating
Billet reheating
Thin wires or rods
Rubber and thick plastic
GalvanizingOther low to medium temperature applications ranging from 50°C/122°F to 1200°C/2192°F
What is a 2-color pyrometer and why do I need it?
How do you measure temp accurately?
How to calculate your spot size diameter?
More Information on Pyrometers
Copyright ©2018 Fluke Process Instruments. Privacy Policy | Terms of Use
We're here to help. The team at Fluke Process Instruments is available to:
- Answer questions
- Schedule a demo (virtual and/or on-site)
- Provide a quote
Interested in more information?
Get your Limited Packaging Offer until December 2nd, 2020
Package will include:
- 1 Endurance High Precision Reference Pyrometer
- 1 DAkkS Certificate (3 points free of your choice)
- 1 Demo Case (cable, software, clamp, mounting nut)
High-Temperature Applications
Molten metals
Heat treating
Hot strip mills
Forging
Continuous casting
Blast furnace
Glass
Cement kiln burning zone
Sintering
Crystal growing
Annealing
Vacuum furnaces and welding
Other high-temperature applications up to 3200°C/ 5792°F
In-house DAkkS Certificate
- High accuracy
- Ratio Pyrometer – 3 point calibration max. deviation +/- 0.3%
- Single short wave – 3 point calibration max. deviation +/-0.2%
- Factory approved calibration geometry supplied for Fluke Process Instruments devices
- Industry 4.0 compliant "COMS and Power"
- LED sighting "indicates spot size"
- Easy to read rear LED and LCD display with 0.1K resolution
- More options includes on-board visible camera, laser sighting and other